B3 Combination Manual Milling Machine & CNC Mill all in one NEW w/ stand

Description

For sale is a brand new combination manual and CNC milling machine. It comes complete with a 3,000 rpm spindle, ballscrews, CNC motors, linear guide rails, electronic enclosure, stand, 48V and 24V power supplies, motor drivers, etc. Most all of the holes in the rear box have already been cut out (for potentiometer, fuse holders, USB pass-through etc). It comes with only what is shown in the pictures. It is designed to be operated as a manual mill with the handwheels, or a full CNC machine by simply flipping a button, but this feature is up to you if you want to wire it that way.
It is a do it yourself kit, and has tremendous value, but it will require wiring, a cnc controller etc to make it a finished product.
Spindle Speed 0 - 3,000 RPM
Table Size 16" x 6" 400 x 140mm
X (Horizontal) Travel 8.6" 220mm
Y (Cross) Travel 4.7" 120mm
Z (Vertical) Travel 7.8" 200mm
Maximum drilling capacity .5" 13mm
Spindle center to column 7" 180mm
Spindle Type ER20
Table T-Slot size MT12
Drive Type Ball Screw
Guideway Linear Guide Rails
Step Motor Torque 2.5/2.5/3.5nm
Power Supply 110 Volts
Base Footprint 8.75"W x 11"D
Width Including Handles 24"
Depth Including Handles 18.75"
Shipping Dimensions 24"W x 31"W x 54"H
Shipping Weight 294 lbs
We are selling this as a local pickup only but you can arrange shipping through
FreightQuote or others and that is no problem at all for us to load /
assist on our end.
Here are the specs to help you:
Shipping Contact: Billy Lower
Address: 4992 Allison Parkway Ste G Vacaville CA 95688
On a custom pallet 24" x 31" x 54"
Cannot be stacked - is shrink wrapped on the pallet
Weight = 294 lbs.
We are a business with plenty of maneuvering room for semi's - it is not residential
We have a forklift and can load - do not pay for a lift-gate.