FLECK 2815 SOFTENER VALVE WITH NXT2 CONTROL WITH MEDIA TANK

Description

Have 4 Controllers and 4 Media Tanks. ,250 for 1-Controller and 1-Media Tank
Softener Valve
The Fleck 2815 is a rugged commercial water softener valve with the advanced NXT2 digital control and electronic meter. The inlet and outlet is 1.5" for continuous flow rate up to 70 GPM.
Valve Options
Piston Options
Hard water bypass
No hard water bypass
Valves are custom built to the size tank it's going on
Features
Offers best-in-class flow rates in a 1.5" commercial valve
Multi-tank system capability
Fully adjustable, 5-cycle control delivers controlled upflow backwash, downflow brining and slow rinse, rapid rinse, timed brine refill, and downflow service
Time-tested, hydraulically-banalced piston for service flow and regeneration
One-piece seal and spacer cartridge simplifies service
316 Grade Stainless Steel valve body for superior strength and durability
1.5" top mount control valve ideal for smaller size commercial/industrial applications
Backwash capacity handles up to 36" diameter tanks for softeners
Consistent brining regardless of salt levels with timed brine refills
Choice of 7-or 12-day clock, manual or volume initiated timers
Continuous service flow rate of 70 GPM with a backwash of 70 GPM
Valve Specifications
Valve material: 316 Grade Stainless Steel
Inlet/Outlet: 1-1/2"
Cycles: 5
Electrical rating: 24 v, 110-240v - 50/60 Hz
Distributor pilot: 1-9/10" O.D.
Drain line: 1-1/2" NPTF
Injector brine system: 1720 - 1/2" OD Tube
Mounting base: 4" - 8 UN
Height from top of tank: 9"
Valve Options
Piston Options
Hard water bypass
No hard water bypass
Valves are custom built to the size tank it's going on
Features
Offers best-in-class flow rates in a 1.5" commercial valve
Multi-tank system capability
Fully adjustable, 5-cycle control delivers controlled upflow backwash, downflow brining and slow rinse, rapid rinse, timed brine refill, and downflow service
Time-tested, hydraulically-banalced piston for service flow and regeneration
One-piece seal and spacer cartridge simplifies service
316 Grade Stainless Steel valve body for superior strength and durability
1.5" top mount control valve ideal for smaller size commercial/industrial applications
Backwash capacity handles up to 36" diameter tanks for softeners
Consistent brining regardless of salt levels with timed brine refills
Choice of 7-or 12-day clock, manual or volume initiated timers
Continuous service flow rate of 70 GPM with a backwash of 70 GPM
Valve Specifications
Valve material: 316 Grade Stainless Steel
Inlet/Outlet: 1-1/2"
Cycles: 5
Electrical rating: 24 v, 110-240v - 50/60 Hz
Distributor pilot: 1-9/10" O.D.
Drain line: 1-1/2" NPTF
Injector brine system: 1720 - 1/2" OD Tube
Mounting base: 4" - 8 UN
Height from top of tank: 9"