Kitamura HX250iF HMC, 2007 - Full 4th Axis Table, Fanuc 18i MB

Description

Kitamura HX250iF HMC, 2007 - Full 4th Axis Table, Fanuc 18i MB
Kitamura HX250iF HMC, 2007 - Full 4th Axis Table, Fanuc 18i MB
We are pleased to offer the following for your consideration:
Machine Type:
HMC - CNC
Make:
Kitamura
Model:
HX250iF
Year:
2007
SPECIFICATIONS
Table
Table Work area (width x length) 254 x 254 mm ( 10 x 10 inch)
Table Indexing B-Axis 0.001◦
Max. Work Size Ø 350 x 400 mm
(13.78 x 15.75 inch)
Load Capacity 100Kg (220 pounds)
Travel
X Axis 305 mm (12.0 inch)
Y Axis 305 mm (12.0 inch)
Z Axis 330 mm (13.0 inch)
B Axis 360◦
Distance from Table surface to spindle center 60 ~ 365 mm (2.4 ~ 14.4 inch)
Distance from Table center to spindle nose 60 ~ 390 mm (2.4 ~ 15.4 inch)
Spindle
Spindle Taper NST NO.30
Spindle Speed 150 - 15,000 min -1
Feed
Rapid Feed X,Y And Z Axis (Auto) 48,000 mm/min. (1889.8 inch/min.)
(Manual) 15,000 mm/min. (590.6 inch/min.)
Cutting Feed X, Y And Z Axis 0-15,000 mm/min. (0-590.6 inch/min.)
Auto Tool Changer (ATC)
Tool Storage Capacity 40 Tools
Tool Selection Method Random, Tool Identified at Magazine
Tool Shank MAS BT30
Max. Tool Size Ø 50 x 200 mm (Ø2 x 7.9 inch)
-Two neighboring tool pots should be empty: Ø 75 x 200 mm (Ø3 x 7.9 inch)
Max. Tool Weight (with tool holder) 2Kg (4.4 pounds)
Tool Change Time 1.2 Second
Motor
Spindle Motor (12 min. Ratio) AC 7.5 KW (AC 10 HP)
(Continuous Operation) AC 5.5 KW (AC 7.4 HP)
Coolant Motor AC 0.73 KW (1.0 HP) (50 Hz)/1.21 KW (1.6 HP) (60 Hz)
ATC Motor AC 0.4 KW (AC 0.54 HP)
Lubrication Motor AC 5 W (AC 1/150 HP)
OPTIONS:
Coolant Through Spindle
Chip Conveyor
Full 4th Axis Table
Machine Weight with NC 4,600 Kg (10,120 pounds)
Electric Power Source
Main Circuit Three Phase current AC 200/220 V
Due to eBay's policy we do not have our contact information listed. The only way we can communicate with you is through the
Buy It Now
button.
Revelation Machinery encourages first-hand inspection of all used machinery.This machine is being sold "AS IS, WHERE IS" This is a used machine that is UNDER POWER and Available for Inspection. Please verify all of the specs listed for this machine. The Seller does not guarantee or warranty expressed or implied these specs to be accurate. It is the buyer's responsibility to confirm all specs and to make sure that this machine is the right machine for them. List prices are not inclusive of rigging or shipping charges.
Listing and template services provided by inkFrog